|
Kayak carriers |
We supply watercraft carriers for canoes,
kayaks, sail boards and surf boards by Thule, Rhino, ProRack and Rola in a range
of styles.
|
|
TOP
|
 |
Thule Kayak 874 ($155)
Carrier with four adjustable rubber supports
that shape to exactly match the hull, gently and firmly holding the
kayak in place. Fits Thule and Rhino square and aero bars.
|
 |
Thule Hydroglide 873 ($179)
Carrier with 2 rubber and 2 felt-lined
supports, each with a large area to protect the hull. Designed to allow
one person to load the kayak from rear of vehicle. Fits Thule and Rhino
square and aero bars.
|
 |
Thule Hull-a-Port 835-1 ($199)
A carrier designed to simplify the loading
process. The kayak is carried at an angle creating extra space for
additional loads or a second kayak. Fits most aero and
square cross bars.
|
 |
Thule Hull-a-Port Pro 837 ($235)
Has all the space saving benefits of the the
Hull-a-port 835 but has the added feature of being able to fold down on
its self to reduce its height when not in use. Fits most aero and
square cross bars.
|
 |
Thule Sail board carrier 833, 533 ($135, $125)
Safe and stable carrier for sail boards. Holds
1 board and 2 masts. 833 fits Thule Aero bar and Rhino Sportz, 533
fits Thule square bar.
|
 |
Thule Surfboard Carrier 832 ($119)
Complete carrier for the transportation of a
surfboard. Fits most aero and square cross bars.
|
TOP
|
|
|
|
RX Kayak Carrier ($199)
Transports kayak on its side create space
on the cross bar. Fully adjustable to allow the carrier to lay flat when
not in use. Can be used with RXX extension for carrying 2 kayaks. Fits
Rhino, ROLA and Thule racks.
|
 |
RXX Extension ($119)
A cost effective way of converting the RX
carrier to carry 2 kayaks.
|
|
560 Side loading / 561 Rear loading ($139)
The cradle adjusts to the shape of your kayak
automatically with its self centering pivot feature. Your kayak is
securely supported by 4 super strong glass reinforced nylon legs while
the kayak is cradled in comfort with its soft rubber pads protecting the
hull. A rear loading kit is available with slippy polypropylene pads on
the rear to ease to allow sliding the kayak into position from the rear
of the vehicle. These products can be configured to fit most makes of
roof racks
Also shown is the Rhino multi-purpose holder
which is available for most makes of roof rack and is ideal for carrying
paddles. ($39 pair)
|
TOP
|
|
|
|
Prorack Kayak Carrier
Dual twist cradles move in two directions to
securely grasp hold of the kayak. Adjusts to take on extreme angles and
all shapes and sizes of kayak.
PR3032N: Fits Prorack, Thule and Rhino aero and
square cross bars ($149)
PR3032NK: The same cradle but with additional
fitting kits to allow fitting to most aftermarket and OE brands of roof
racks. The only aftermarket carrier to fit Ford Territory, and OE racks
with a plastic outer sleeve and plastic owl wing wind deflector (eg,
Honda) ($179)
|
TOP
|
 |
|
 |
Rola Water Craft Carrier WCC ($129)
A sling type carrier which conforms to any
shape hull allowing the craft to be carried upright, inverted or on its
side. Popular carrier for fragile fiberglass hulls. Fits Rola Sports,
Rola Heavy Duty (#RCWCC). more
info
|
 |
Rola Universal Water Craft Carrier
WCU ($155)
The Rola WCU employs a 'Multi-Pivot' system
to mould to the widest range of displacement hull shapes as well as
assisting side loading. Fits Rola, Thule and Rhino aero racks. more info
|
TOP
|
For more info and prices to fit
your specific vehicle give us a call on 02 9817 1475, send us an e-mail or call in (map) to discuss your requirements.
|
